NITRIDE 1/10 G2 is a new generation electronic speed controller for sensored Brushless DC motors. Using Advanced Cooling Technology based on Aluminium NITRIDE Ceramic cooler, NITRIDE 1/10 has excellent thermal conductivity and can be used with powerful motors from 4,5T up.
NITRIDE 1/10 G2 brings revolutionary battery current and discharge real-time monitoring and Innovative Intelligent Algorithms to protect ESC in case of motor failure or mechanical issue.
NITRIDE 1/10 G2 is featured with reverse polarity protection.
NITRIDE 1/0 G2 has TFT matt surface LCD colour display and no other interface is needed. Simple settings adjustment with 3 buttons on display.
Programmable parameters and functions:
•Revolutionary simple Rx calibration.
•Real time monitoring: battery voltage, ESC and motor temperatures, motor diagnostics and more.
•Revolutionary battery current and discharge monitoring.
•Pre-race diagnostics: motor temperature, sensor cable, bad motor, battery, BEC voltage and more.
•Easy programming: throttle, brake, boost and turbo timing, Hall angle and many other functions.
•Race data logging, temperature and other curves, histograms and more. Data will be saved after turn of the ESC.
•Adjustable maintenance reminder for easy checking.
•No programming interface required.
Key Features:
•TFT LCD colour display, matte finish - LCD colour display with a resolution of 160 x 80 pixels allows you to set all the parameters and check all the data directly on your ESC, without the need for a programming card or a mobile application. Everything you need is inside your ESC.
It is really easy to use - 3 buttons allow you to quickly set everything you need and a single view is enough to check all the parameters necessary for the race. Simple. Fast. Accurate.
•Easy Check and Set - The display gives you an overview of all the important data and events - before the race, during the race and after the race. You can change your settings quickly and get instant feedback, without the delay of connecting an external control interface.
•Advanced Cooling Technology - NITRIDE Featured Advanced cooling technology based on Aluminium NITRIDE heatsink, specially developed for NITRIDE, gives the ESC excellent thermal conductivity and long-term resistance to high temperatures and loads.
MOSFETs transistors are cooled directly without any additional thermal resistance layer!
During production, ELCERAM used very thick layers of special materials such as silver and copper for very low internal resistance and the latest technologies inspired by advanced power systems designed and manufactured by ELCERAM.
•For even better cooling NITRIDE 1/10 G2 features additional aluminium cooling thins and a connector for Intelligent FAN, if it is needed in special conditions.
•Reverse polarity protection.
•Intelligent algorithms for ESC protection.
•Dimensions - Despite having so many great new features, the NITRIDE 1/10 G2 is really compact and even smaller than Generation 1. Its dimensions are suitable for all types of 1/10 RC cars.
What is more, 70% of the weight is on the underside of the ESC, giving your car even greater stability!
•Easy installation - installation of NITRIDE 1/10 is quick and easy – it can be sticked to the chassis using aluminium mounting plate (included in the package) or screwed directly onto a suitable place, ideally with good thermal conductivity. For 4.5T and 5.0T motors we recommend to use passive heat sink or external FAN for better cooling effect, if desired.
•In addition, the cover of ESC with display and buttons is able to be changed simply in case of any accident.
Specification:
•Type:
Scale: 1/10th Onroad and Offroad, Stock, Open Stock, Modified and other categories
Brushless
Sensored
•Waterproof: No
•Polarity protection: Yes
•Relevant parameters:
Cont./Peak Current: 180A / 1500A
Input Voltage: 2S LiPo
BEC Output adjustable voltage: 6.0 - 7.4V
BEC current Cont. / Peak: 6A/12A
•Size and weight:
Width: 34 mm
Length: 36,5 mm
Height: 24 mm
Weight: 59 g without wires
BEC cable length: 180 mm, grey stripe is minus pole
•Applications:
Applications: Sensored Brushless DC Motors from 4,5T up
Vehicles: 1/10 Buggy, TC and other cars
•Zero Timing (Blinky Mode) supported.
•External capacitors needed (included in package)
Elceram Nitride 1/10 Electronic Speed Controller for sensored BLDC motors
SKU:ELC020
Brand:Elceram
Regular price
£279.99
Sold out
Adding product to your cart
Description
Specifications
-
Availability:
Out of stock
-
SKU:
ELC020
- Vendor:
-
Collections:
--
Delivery
Delivery is charged as priced on each order. Once you have placed an order it will usually be dispatched the same day or the next day depending on the time the order was placed. Orders usually need to be received before 1.30 pm for same day dispatch.
If you wish to cancel your order after it has been dispatched, you will be charged for both delivery and collection cost. You will also need to pay any return costs if you wish to be refunded for your purchase (but not the original delivery costs).
Most orders will dispatched using a tracked system. Please make sure you enter your e mail address and mobile number on your order to receive text notifications.
If there is no one available when our delivery partner tries to deliver your order, they will usually try to deliver again the next working day or they will drop a card in to offer you a collection from a local collection point. If you should refuse delivery of goods, or are not available to accept the delivery on both delivery attempts, you will be required to cover any extra costs incurred.
Royal Mail staff and couriers sometimes leave parcels with a neighbour or in an outbuilding or at the rear or side of the property. If a parcel is too large to go through the letter box Royal Mail may return it to the local sorting office (not the local Post Office) but may not leave a card advising you. First Class may take up to 4 days and second class up to 10 days delivery time. Please check there first before reporting non delivery. Tracked deliveries will be 24 or 48 hour but may take longer especially around a bank holiday.
All quoted delivery prices are for most UK Mainland addresses. Northern Ireland (BT), Isle of Wight (PO30-37), Isle of Man (IM), Scottish Highlands and Orkney Isles (PA, ML, EH, KA, G, KY, PH, DD, AB, IV, KW), Outer Hebrides and the Shetland Isles (HS, ZE), Channel Islands (JE and GY) will incur additional charges and may also experience delivery delays.
We will only deliver goods to the address on the order.
We are closed on Wednesdays, Sundays and bank holidays so do not ship on these days.
Due to postal restrictions we are unable to send liquids, batteries including Lipo/Life and aerosol products by Royal Mail. These have to be sent by courier as they have to go by road. We do not send fuel.
If you wish to cancel your order after it has been dispatched, you will be charged for both delivery and collection cost. You will also need to pay any return costs if you wish to be refunded for your purchase (but not the original delivery costs).
Most orders will dispatched using a tracked system. Please make sure you enter your e mail address and mobile number on your order to receive text notifications.
If there is no one available when our delivery partner tries to deliver your order, they will usually try to deliver again the next working day or they will drop a card in to offer you a collection from a local collection point. If you should refuse delivery of goods, or are not available to accept the delivery on both delivery attempts, you will be required to cover any extra costs incurred.
Royal Mail staff and couriers sometimes leave parcels with a neighbour or in an outbuilding or at the rear or side of the property. If a parcel is too large to go through the letter box Royal Mail may return it to the local sorting office (not the local Post Office) but may not leave a card advising you. First Class may take up to 4 days and second class up to 10 days delivery time. Please check there first before reporting non delivery. Tracked deliveries will be 24 or 48 hour but may take longer especially around a bank holiday.
All quoted delivery prices are for most UK Mainland addresses. Northern Ireland (BT), Isle of Wight (PO30-37), Isle of Man (IM), Scottish Highlands and Orkney Isles (PA, ML, EH, KA, G, KY, PH, DD, AB, IV, KW), Outer Hebrides and the Shetland Isles (HS, ZE), Channel Islands (JE and GY) will incur additional charges and may also experience delivery delays.
We will only deliver goods to the address on the order.
We are closed on Wednesdays, Sundays and bank holidays so do not ship on these days.
Due to postal restrictions we are unable to send liquids, batteries including Lipo/Life and aerosol products by Royal Mail. These have to be sent by courier as they have to go by road. We do not send fuel.
Elceram Nitride 1/10 Electronic Speed Controller for sensored BLDC motors
Regular price
£279.99
Sold out
The Model Shop You Can Trust
Your Local Model Shop, Online!
We’re a real, independent model shop with a passion for all things miniature. Whether you’re shopping online or need expert advice, we’re here to help!
Fast Shipping & Friendly Help
We pack every order with care and ship quickly, so your models arrive safe and sound. Need advice? Our expert team is happy to help!