5 Minute Quick Setting Epoxy Gel Glue Single Use(0.14oz, 4g)
Gel Quick Setting Epoxy is perfect for large projects where a thicker viscosity gel is needed. This product fills gaps and covers large porous surfaces like carpeting, taxidermy and much more. No mess and no spilling
Key Features
Positioning time 2-3 minutes
Initial colour: Green resin/hazy white hardener
Final colour: Hazy white
Maximum Gap: .25
Hardness, Shore D: 75-85 (After full cure)
Set Time: 4-6 minutes @ 65-80F
Shear Strength, Steel: 1500 psi ( 20%); aluminium: 900 psi ( 20%)
Handling Time: After 1 hour
Full Strength: 24 hours
Operating Temperature Range: -36 to 149C (-32 to 300F)
Details
Single Use Quick Setting Gel Epoxy Adhesive is the perfect product to use when you need to get your project pieces in place fast. This product fills gaps and covers large porous surfaces. The final cure colour is cream but can be mixed with paint to colour match. Package contains just the right amount of product for most small projects. The metal tubes dispense effortlessly, and are easy to mix. This product sets in only 5 minutes.
Directions:
- Surfaces should be clean and dry, free from oil and grease.
- Roughen surfaces with emery cloth or sandpaper for best results.
- Dispense from container following package directions & mix thoroughly, approximately 1 minute. Use package blister or clean cardboard for mixing container, do not use metal.
- Apply to both surfaces and mate parts together.
- Remove excess epoxy immediately with denatured alcohol.
- Sets in 4-6 minutes at room temperature (77F / 25C) with full cure in 24 hours.